Golf Simulator Installation Guide (2026): What You Can Do Yourself, What to Hire Out, and How Long Each Part Takes
Quick summary· AI-generated
The guide breaks down which components golfers can install themselves (nets in 5-10 minutes, pipe-frame enclosures in ~1 hour, floor launch monitors with no mounting) versus what to hire professionals for (new electrical outlets, ceiling mounts where joists don't align, built-in room framing). It provides specific installation times, tool lists, and people requirements for products from Net Return, Carl's Place, ProTee, and others, helping builders plan their sim room project scope and budget realistically.
Excerpt from Top Shelf Golf - Golf
Golf simulator installation Install your golf simulator yourself, or know exactly what to hire out
How long each part takes to put in, how many people and tools it needs, and the three jobs worth paying a trade for.
The boxes land on the driveway and the first swing feels a long way off. It is closer than it looks: a net goes up with no tools, a pipe-frame enclosure with hand tools and a ladder, and a floor launch monitor needs no mounting at all. Three decisions remain: ceiling, power, walls.
Can you install a golf simulator yourself?
Yes, for most home setups. Most of what we sell is built for owner installation; the three cards below show the quickest jobs and the one that takes two people.
5 to 10 minutes
Net Return net
Push-button poles, no tools; side barriers take under 5 minutes more.
About an hour
Carl's Place DIY enclosure
Basic tools; you cut the 1 in EMT to the list unless you buy the pipe kit.
Two people, one lift
ProTee VX overhead
ProTee asks for two to lift the VX into its bracket, 9 to 10 ft up.
Do it yourself: nets, pipe-frame enclosures, mats, a floor launch monitor, the PC and software, and a projector on a floor mount.
Hire a trade for: a new outlet or network run at the ceiling, a ceiling mount where the joists are not where you need them, and the framing and finish work of a Built-In room.
The two exceptions: Carl's Place sells the Built-In kit to people skilled at home renovation, and Foresight asks for qualified installers on the ceiling-mounted Falcon.
Start with the room: the golf simulator builder sizes the enclosure, launch monitor and projector to your space.
How long does each part of a golf simulator take to install?
Nets and enclosures in the first table, mounts and overhead units in the second.
Net or enclosure Time People and tools The job
Net Return net
5 to 10 minutes One person, no tools Push-button poles; the net slips over the frame
Floating Screen bay
Under 45 minutes One person, no tools Same push-button frame; screen and side netting hang on
Carl's Place DIY enclosure
About an hour 1/2 in wrench, 3/16 in hex key, tape, mallet, pliers, saw, 8 ft ladder Cut 1 in EMT to the list (or buy the pipe kit), frame, enclosure, screen
Carl's Place Pro enclosure
About two hours A friend to help; 6 mm and 3/16 in hex bits, tape, mallet, pliers, saw, 8 ft ladder Rigid steel-fitting frame; cables and springs tension the screen
SIG10 enclosure
Under an hour (maker FAQ) At least two people, a step…
Products in this article
- ProTee VXView on Amazon↗
- Foresight FalconView on Amazon↗
As an Amazon Associate we earn from qualifying purchases.
Comments (0)
No comments yet.